NEWS
-
X-ray flaw detection is applied in the production process, which enhances the on-site inspection from visual inspection to internal inspection microscopic inspection. -
The injection pressure is 100MPa, the high speed is 2.6m/s, the low speed is 0.15m/s, the slow injection stroke is 300mm, and the mold retention time is 3s. -
X-ray is a kind of electromagnetic wave with a short wavelength. It is a kind of photon with a wavelength of 10-6~10-8cm. X-ray has the following characteristics: 1 penetration -
This system uses a rotary encoder, which can generate 1000 pulse signals in one rotation, and the forward distance corresponding to one rotation is 0.5 meters. -
For each frame of the flaw detection image containing the defect, the system needs to know the number of defects, the size of the defect, and the location information of the defect. -
If there are defects such as pores, slag inclusions, and incomplete penetration in the weld zone, the X-rays penetrated by the defect area are more
-
Sales@hata-ndt.com -
+86 371 63217179
LATEST NEWS:
